Product details
- Cone shade cut from natural yellow travertine
- Opal glass globe softens the warm white light
- Round walnut backplate on a black metal arm
A wall light built around a cone cut from natural travertine. The cone hangs open-end down from a short black metal arm, and an opal white glass globe is seated in its mouth, bulging just below the rim. Behind the arm is a round backplate turned from dark walnut-finish wood, so the fitting reads as three plain shapes - stone, glass and timber - with no visible hardware between them.
Design and materials
The shade is natural yellow travertine, left unpolished enough to show the open pores and fine banding the stone is known for, which means the figure differs from piece to piece. The globe below it is opal white glass rather than clear, so the light source is hidden. The arm is black-finished metal and joins the cone to a solid round backplate in a dark walnut finish. It is supplied in a single colourway.
Light
The colour temperature is warm white. Rated output is 249-2000 lm, covering an area of roughly 3-5 square metres - enough for a bedside, a hallway or a spot above a console rather than for lighting a whole room. Because the opal globe sits below the rim of the cone, light falls forward and downward as well as spilling up the wall behind.
Installation
The fitting is wall-mounted and the supplier lists its installation method as self-contained, with the electrics housed inside the unit. No wiring diagram or fixings list is published, so we would suggest having it fitted by a qualified electrician.
Specifications
- Product type: Indoor wall light / wall sconce
- Shade material: Natural yellow travertine
- Diffuser: Opal white glass globe
- Arm: Black-finished metal
- Backplate: Round wood, dark walnut finish
- Colourway: Yellow travertine & walnut (single option)
- Colour temperature: Warm white
- Luminous flux: 249-2000 lm
- Coverage: Approximately 3-5 square metres
- Installation: Wall-mounted, self-contained
- Model number: M-073
- Listed size, not confirmed by our supplier: W 13 cm x H 16 cm
- Listed lamp base, not confirmed by our supplier: E26/E27, one bulb up to 40W or LED equivalent, bulb not included
The last two lines come from the retail listing this fixture is sold under rather than from our supplier's own specification, so please treat them as a guide rather than a guarantee. Every other figure above is taken from the supplier's published specification.
Shipping and returns
Shipping is free on all orders. Orders are processed within 1-3 business days and, once dispatched, typically arrive within 4-12 business days. Returns can be requested within 30 days of receiving your item, in its original condition and packaging. Full details are in our Shipping Policy and Refund Policy.
A Soft Warm White Glow, Not a Bare Bulb
The opal glass globe sits in the open mouth of the cone, so the light source is hidden and reads as an even warm white glow. Rated output is 249-2000 lm, enough to cover roughly 3-5 square metres.
Natural Travertine Paired With Dark Walnut
The cone is cut from natural yellow travertine, with the open pores and fine banding the stone is known for, so no two shades carry quite the same figure. It meets a round backplate in a dark walnut finish, joined by a short black metal arm.
Wall-Mounted and Self-Contained
The fitting mounts flat to the wall and the supplier lists it as self-contained, with the electrics housed inside the unit. The arm holds the cone clear of the backplate, so the light falls forward and down as well as up the wall.
Frequently asked questions
What is the wall light made of?
The cone shade is cut from natural yellow travertine and the globe seated in it is opal white glass. The arm is black-finished metal and the round backplate is wood in a dark walnut finish.
What size is it?
The retail listing this fixture is sold under gives it as 13cm wide by 16cm tall. Our supplier does not publish its own dimensions, so please treat those figures as a guide rather than an exact specification.
Is a bulb included, and what fitting does it take?
No bulb is included. The retail listing describes an E26/E27 screw-fit socket taking one bulb up to 40W or an LED equivalent. Our supplier does not publish the socket type, so we would check the fitting on arrival before buying a bulb.
What colour is the light and how far does it reach?
Warm white. It is supplied in a single colourway - yellow travertine with warm white light - and is rated at 249-2000 lm, covering an area of roughly 3-5 square metres.
How is it installed?
It is wall-mounted, and the supplier lists the installation method as self-contained, with the electrics inside the unit. No wiring diagram or fixings list is published, so we would suggest having it fitted by a qualified electrician.