Product details
- Travertine cylinder head rotates up or down
- Brass button switch built into the backplate
- 3W integrated warm white LED, no bulb needed
A compact directional wall light built from two materials: a slim walnut-finish wooden backplate, 5 cm wide and 17 cm tall, carrying a short cylinder of natural yellow travertine on a small brass pivot. The stone cylinder is 4 cm across and 12 cm long, open at one end, so the light leaves the fitting as a single soft beam rather than spilling in every direction.
Design and materials
The backplate is wood in a walnut finish and the head is natural travertine, so the open pores, fine cracks and soft banding differ from piece to piece. The pivot knuckle and the button switch are brass. The fitting is offered in one colourway, Walnut and Yellow Travertine.
Adjustable head
The travertine cylinder sits on a rotating joint, so the beam can be aimed up the wall or down onto a book, a bedside table or a picture. The direction is set by hand at the fitting and holds where you leave it.
Light and switching
Lighting is by integrated LED rated at 3W in a warm white 3000K colour temperature, so there is no bulb to buy or fit. A small round brass button switch is set into the face of the backplate, which means the light can be turned on and off at the fitting itself. The supplier gives a coverage figure of 5-10 square metres.
Size and installation
The backplate measures 5 cm wide by 17 cm tall and the travertine head is 4 cm in diameter by 12 cm long. The fitting is self-contained with the LED and driver inside the unit, runs on AC 110-240V and is hardwired rather than plugged in, so it is best fitted by a qualified electrician. It arrives assembled and is rated IP20 for indoor use only.
Specifications
- Product type: Indoor wall light / reading spot
- Backplate: Wood, walnut finish, 5 cm wide x 17 cm tall
- Shade: Natural yellow travertine cylinder, 4 cm diameter x 12 cm long
- Hardware: Brass pivot and brass button switch
- Projection from wall: Not published
- Adjustability: Rotating joint, beam aims up or down
- Light source: Integrated LED, 3W, bulb included
- Colour temperature: Warm white 3000K
- Voltage: AC 110-240V
- Power source: Hardwired
- Switch: Brass button switch on the backplate face
- IP rating: IP20, indoor use only
- Installation: Wall mounted, self-contained, no assembly required
- Suggested coverage: 5-10 square metres
- Colourway: Walnut and Yellow Travertine
Shipping and returns
Shipping is free on all orders. Orders are processed within 1-3 business days and, once dispatched, typically arrive within 4-12 business days. Returns can be requested within 30 days of receiving your item, in its original condition and packaging. Full details are in our Shipping Policy and Refund Policy.
Aim the Light Where You Need It
The travertine cylinder sits on a rotating brass joint, so the beam can be turned up the wall for a soft wash or down onto a book, a bedside table or a picture. Because the stone is open at one end only, the light leaves as a single contained beam rather than spilling across the room.
Travertine, Walnut and Brass
Three materials and nothing else: a slim walnut-finish wooden backplate 5 cm wide by 17 cm tall, a head cut from natural yellow travertine, and brass for the pivot and the switch. The stone keeps its open pores and fine cracks, so the markings differ from one piece to the next.
Switched at the Fitting
A small round brass button switch is set into the face of the backplate, low down, so the light can be turned on and off at the fitting itself. The LED and its driver are housed inside the unit, which runs on AC 110-240V and is hardwired, so it should be installed by a qualified electrician.
Frequently asked questions
What is this wall light made of?
The backplate is wood in a walnut finish, the cylinder head is natural yellow travertine, and the pivot and switch are brass. Travertine is a natural stone, so the pores, cracks and banding vary from piece to piece.
How big is it?
The backplate is 5 cm wide by 17 cm tall and the travertine head is 4 cm in diameter by 12 cm long. How far it projects from the wall is not published by the supplier.
Can the light be angled?
Yes. The head is mounted on a rotating joint, so the beam can be directed up or down. You set it by hand at the fitting.
Does it need a bulb?
No. The LED is integrated and included, rated at 3W in a warm white 3000K colour temperature. This colourway ships in warm white only.
How is it switched and wired?
There is a brass button switch on the face of the backplate. The fitting is hardwired and self-contained, running on AC 110-240V, so it should be installed by a qualified electrician. It is rated IP20 for indoor use only.